Best Bike Mirror for E-Bikes: 6 Handlebar and Bar-End Mirrors
IBy Ilias · Updated October 10, 2026 · Listings checked on Amazon.com
Affiliate links: if you buy through our links, we earn a commission at no extra cost to you. It does not affect our picks.
In short
The best bike mirror for most flat-bar e-bikes is the Hafny HF-MR095. It clamps onto 21-26 mm handlebars, uses a convex anti-glare glass lens and rotates and tilts 360 degrees. It does not fit drop bars; road riders should look at the CatEye BM-45 or the Hafny HF-MR083 bar-end mirror instead.
Specs taken from the product listings on October 10, 2026. –: not listed by the manufacturer.
The models in detail
This page helps you choose a rearview mirror for an e-bike, city bike or commuter, where checking traffic behind you without turning your head matters most. We compared six mirrors from Amazon.com product listings checked on October 10, 2026, focusing on how each one mounts and which handlebars it fits. We did not install or ride with them, so fit and lens quality reflect what the listings say.
1 · Our pick
Hafny HF-MR095 Handlebar Mirror
Mirror4,5/5 from 19550 Amazon customer ratings (as of October 10, 2026)
The Hafny HF-MR095 clamps onto the handlebar itself rather than the bar end, so it works with closed grips, a common setup on e-bikes. The clamp takes bars of 21-26 mm outside diameter, and the listing limits it to flat bars. One bullet claims it fits drop bars, but another states it does not, so assume it will not. The lens is convex automotive-grade glass, shatterproof according to the listing, with a blue anti-glare coating that the brand rates at 50-60%. A high-impact nylon housing holds it, and it rotates and tilts 360 degrees to set your view. The variant shown is silver and mounts on the left; a right-side mirror is a separate option. Compared with the bar-end Hafny HF-MR083, you get glass instead of steel and no grip cutting. It has by far the most reviews here, 19,550, with an average of 4.5 out of 5.
Pros, cons and specs
Pros
Automotive-grade convex glass lens with an anti-glare blue coating (50-60% anti-glare per the brand).
High-impact nylon housing.
Rotates and tilts 360 degrees to set the view.
Clamps onto 21-26 mm outside-diameter MTB and cruiser handlebars.
Cons
Does not fit drop bars, despite one bullet saying it fits flat and drop handlebars.
The variant listed is for the left side; a right-side mirror is a different option.
Best for: E-bike, MTB and cruiser riders with flat bars who want a clear glass mirror.
Skip it if you ride drop bars or your bar diameter is outside 21-26 mm.
The Hafny HF-MR083 uses a polished stainless steel lens that the brand calls unbreakable, a real point in its favor if your e-bike falls over at a rack. The listed variant has a 62 mm diameter. It mounts left or right, above or below the bar, on both flat and drop bars, which makes it the most flexible mount on this page. It fits handlebars with an inside diameter of 14.8 to 23 mm, and the foldable frame with 360-degree rotation tucks it in when parking. The catch is the grip: you need open-ended grips or must cut a hole in yours, and the listing says it does not work with Trek Isozone grips. Installation needs a 5 mm hex key. Steel reflects differently from glass, and the listing makes no anti-glare claim. Two model numbers appear in the title, so check the variant. Customers rate it 4.3 out of 5 across 12,329 reviews.
Pros, cons and specs
Pros
Polished stainless steel lens that the brand says is unbreakable and fully recyclable.
Mounts left or right, above or below the bar, on flat and drop bars.
Foldable frame and 360-degree rotation for parking and storage.
Fits handlebars with an inside diameter of 14.8 to 23 mm.
Cons
Needs open-ended grips or a hole cut in the grip; does not work with Trek Isozone grips.
A 5 mm hex key is required for installation.
Best for: E-bike and commuter riders who want a sturdy bar-end mirror that won't shatter.
Skip it if your grips have closed ends you don't want to cut.
The Mirrycle Mountain Mirror is a 3 in round convex glass mirror, the largest lens size stated among the glass models here, and the listing says it gives a wide view of traffic behind. It plugs into the handlebar end and installs in minutes with the included wrench. It pivots to any viewing angle, according to the listing. It is designed for mountain-style flat bars; drop bars are not mentioned. The fit data is the problem: one part of the listing gives an inside-diameter range of 13.75 to 22.5 with no unit, and another gives 15.8-23.4 mm. Measure the inside of your bar end before ordering, and note that closed grips block it. The side is not specified either. Compared with the Hafny HF-MR095 clamp, it sits further out and needs an open bar end. It has the highest rating on this page, 4.6 out of 5 across 9,767 reviews.
Pros, cons and specs
Pros
Three-inch round convex mirror that gives a wide view of traffic behind.
Pivots to any viewing angle, according to the listing.
Mounts in the handlebar end in minutes with the included wrench.
Cons
Designed for mountain-style flat handlebars; drop bars are not mentioned.
The handlebar inside-diameter range is inconsistent in the listing (13.75 to 22.5 in one place, 15.8-23.4 mm elsewhere), so measure your bar end first.
Side (left or right) is not specified.
Best for: Commuters on flat-bar bikes and e-bikes who want a simple bar-end mirror.
Skip it if you ride drop bars or your bars have closed grips that block the bar end.
The CatEye BM-45 is the only glass mirror on this page that the listing says fits drop bars, along with flat bars. It mounts in the bar end and sticks out very little, which keeps the bike narrow at racks and in tight bike lanes. The body is aluminum and the glass lens is described as nearly distortion-free. That is close to everything the listing tells you. The mirror size, the compatible handlebar inside diameter, the adjustment range and the side it mounts on are all missing. A small mirror gives a narrower view than the 3 in Mirrycle, so it suits riders who already shoulder-check and want a quick glance aid. If you ride an e-bike with closed grips, it will not fit without changing them. Check your bar end before buying. Customers give it 4.3 out of 5 across 7,871 reviews.
Pros, cons and specs
Pros
Bar-end mirror that fits both drop and flat handlebars.
Aluminum and glass construction, described as nearly distortion-free.
Minimal projection from the bar for a clean look.
Cons
Mirror size and compatible handlebar inside diameter are not given.
No information on adjustment range or which side it mounts on.
Best for: Road and commuter riders who want a discreet bar-end mirror.
Skip it if you want a large mirror with a wide field of view.
This unbranded ME-006LS mirror clamps onto standard 22.2 mm handlebars with an aluminum alloy clamp and a fiber-reinforced nylon body. The listing describes blast-resistant safety glass with an anti-glare coating rated at 50%, slightly below the range Hafny gives for the HF-MR095. It rotates up to 360 degrees and folds out of the way when parking. Installation uses a 4 mm hex key with a recommended torque of 2 Nm, the only torque figure on the page. It mounts on the left side only, does not fit drop bars, and the lens size is not given. There is also a mismatch: the brand content shows a black, hexagon-shaped mirror while the title describes a silver lens, so the product you receive may differ from the photos. Against the Hafny clamp, it covers a single bar size instead of a range. Customers rate it 4.5 out of 5 across 7,409 reviews.
Pros, cons and specs
Pros
The lens is blast-resistant safety glass with an anti-glare coating, according to the listing.
The clamp is aluminum alloy and the body fiber-reinforced nylon; it fits standard 22.2 mm handlebars.
The mirror rotates up to 360 degrees and folds out of the way when parking.
Installation uses a 4 mm hex key, with a recommended torque of 2 Nm.
Cons
Left side only: a second mirror is needed for the right side.
It does not fit drop bars, and the lens size is not given.
The brand content describes a black, hexagon-shaped mirror, which does not match the silver-lens title.
Best for: Riders of flat-bar e-bikes, city or mountain bikes who want a glass rearview mirror on the left side.
Skip it if your bike has drop bars or you need a right-side mirror.
The WITTKOP mirror uses a convex real-glass lens that the listing says gives a wide HD field of view. It rotates 360 degrees, tilts and folds away, and you can mount it above or below the handlebar with the supplied screw. Mounting below the bar can keep it clear of a large e-bike display or a phone holder, which is the main reason to pick it here. WITTKOP says the frame uses over 20% reinforced materials, without saying what that means for strength. The listing is thin: no lens size, no handlebar diameter and no side are given, and drop bars are not mentioned. That makes it the hardest clamp mirror on this page to match to your bike on paper, so measure your bar and contact the seller if you are unsure. Compared with the Hafny HF-MR095, you trade a stated fit range for more mounting positions. Customers rate it 4.2 out of 5 across 6,223 reviews.
Pros, cons and specs
Pros
The convex real-glass mirror offers a wide HD field of view, according to the listing.
It rotates 360 degrees, tilts and folds away.
It can be mounted above or below the handlebar with the supplied screw.
Wittkop says the frame uses over 20% reinforced materials.
Cons
The listing gives no lens size, bar diameter or side (left/right).
Drop-bar compatibility is not mentioned.
Best for: E-bike riders who want a glass mirror that can sit above or below the bar.
Skip it if you need confirmed fit for a specific handlebar diameter.
A clamp mirror is the easier fit on most e-bikes, because it works with closed grips. The Hafny HF-MR095, the unbranded ME-006LS and the WITTKOP clamp onto the bar. The Hafny HF-MR083, Mirrycle and CatEye BM-45 plug into the bar end, which needs open-ended grips or a hole cut in yours. Many e-bike grips have closed ends or lock-on collars, so look at your grips before choosing. Bar-end mirrors stick out less from the bar but sit at the widest point of the bike.
Handlebar diameter and type
Measure your handlebar before ordering, because each mirror fits a narrow range. The Hafny HF-MR095 clamps onto 21-26 mm outside diameter, and the ME-006LS fits 22.2 mm bars. Bar-end models need an inside-diameter match: 14.8 to 23 mm for the Hafny HF-MR083, while the Mirrycle listing gives two different ranges. The CatEye BM-45 and WITTKOP give no figure at all. Only the CatEye BM-45 and Hafny HF-MR083 list drop-bar compatibility. Flat bars are the safe assumption for the rest.
Glass, convex or steel lens
Convex glass gives the widest, clearest view, while steel survives drops. The Hafny HF-MR095, Mirrycle, ME-006LS and WITTKOP use convex or safety glass, and two of them add an anti-glare coating against headlights. The Hafny HF-MR083 uses stainless steel that the brand calls unbreakable, which suits bikes that get parked roughly or fall at racks. The CatEye BM-45 combines glass with an aluminum body. Lens size is only given for two models, the 3 in Mirrycle and the 62 mm Hafny bar-end.
Left side, right side or both
In the US you ride on the right, so a left-side mirror shows passing traffic. The Hafny HF-MR095 variant listed and the ME-006LS are left-side only. The Hafny HF-MR083 mounts left or right. The Mirrycle, CatEye BM-45 and WITTKOP listings do not say which side, which usually means you need to check the product photos or ask the seller. If you want to watch both sides, budget for two mirrors and check that each one fits your bar.
Adjustment and folding
A mirror that rotates and folds stays aligned longer and survives tight parking. Four models here fold or rotate fully: the Hafny HF-MR095 rotates and tilts 360 degrees, the Hafny HF-MR083 folds and rotates, the ME-006LS rotates and folds, and the WITTKOP rotates, tilts and folds. The Mirrycle pivots to any angle but does not mention folding. The CatEye BM-45 gives no adjustment details. Set the mirror while seated in your normal riding position, then tighten it.
Space on a busy e-bike cockpit
Check how much free bar you have, because e-bike handlebars are often crowded. A display, a throttle, a bell and a phone mount can leave little room for a clamp. The WITTKOP can mount above or below the bar, which helps around a display. Bar-end mirrors avoid the crowded middle entirely, provided your grips allow it. The ME-006LS notes a 4 mm hex key and a 2 Nm torque, so have the right tool before you start.
Skip it if…
you ride drop bars and were looking at the Hafny HF-MR095 or the ME-006LS clamp mirrors.
your grips have closed ends you do not want to cut, since three mirrors here need an open bar end.
you need a right-side mirror and the listing only offers a left variant.
you want a confirmed handlebar diameter before buying the CatEye BM-45 or the WITTKOP.
you expect one small mirror to replace looking over your shoulder before turning.
FAQ
What is the best bike mirror for an e-bike?
The Hafny HF-MR095 is our pick for flat-bar e-bikes. It clamps onto 21-26 mm bars, so closed grips are no problem, and it uses convex anti-glare glass that rotates and tilts 360 degrees. It does not fit drop bars. For drop bars, the CatEye BM-45 or the Hafny HF-MR083 bar-end mirror are listed as compatible.
Which side should a bike mirror go on?
In the US, a bike mirror usually goes on the left side, because that is where passing cars come from. The Hafny HF-MR095 variant and the ME-006LS are left-side only. The Hafny HF-MR083 mounts on either side. Three listings on this page do not state the side, so check the photos or ask the seller first.
Are bar-end mirrors better than handlebar clamp mirrors?
Bar-end mirrors are better for a clean, narrow look, and clamp mirrors are better for bikes with closed grips. A bar-end mirror needs an open bar end, so you may have to cut your grip. A clamp mirror fits around the bar, though it needs free space next to the grip, which can be tight beside an e-bike display.
Do bike mirrors fit drop bars?
Only some do. On this page, the CatEye BM-45 and the Hafny HF-MR083 are listed for drop bars. The Hafny HF-MR095 and the ME-006LS are clearly flat-bar only, the Mirrycle is designed for mountain-style flat bars, and the WITTKOP listing does not mention drop bars. Check your bar type before ordering.
Is a glass or a steel bike mirror better?
Glass gives a clearer view, and steel is harder to break. Most mirrors here use convex glass, some with an anti-glare coating against headlights. The Hafny HF-MR083 uses a stainless steel lens that the brand calls unbreakable, a sensible choice if your bike often tips over at racks or gets loaded into a car.
How do I measure my handlebar for a bike mirror?
Measure the outside diameter for a clamp mirror and the inside diameter of the bar end for a bar-end mirror. The Hafny HF-MR095 needs 21-26 mm outside, the ME-006LS fits 22.2 mm bars, and the Hafny HF-MR083 needs 14.8 to 23 mm inside. A caliper gives the most reliable reading on your own bike.
I
Ilias, eBike Compas
Models are picked from the product listings on Amazon.com, recorded and dated. Missing data is flagged instead of guessed, and no hands-on test is described unless it actually happened. Our method